Contact Information - Driving Directions
Davis-Standard, LLC
1 Extrusion Drive
Pawcatuck, CT 06379
Tel +1 (860) 599-1010
From Route I-95 North (New York/New Haven Area):
- Take Exit 91.
- At bottom of ramp, go straight through the stop light.
- Take the third right onto Farmholme Road and follow all the way to the end (about 2 miles).
- Take a left onto Route 1.
- Follow Route 1 approximately 0.7 miles.
- Davis-Standard is on the right.
From Route I-95 South (Providence/Boston Area):
- Take Exit 92.
- At bottom of ramp, take a left onto Route 49.
- Follow that until you get to a stop light.
- At the light, take a left onto Route 2. Follow Route 2 all the way to the end (about 2 miles).
- Take a right onto Route 1.
- Follow Route 1 approximately 1.8 miles.
- Davis-Standard is on the left past the high school.
From Hartford:
- Take 91 South to Route 84 East.
- Take Exit 55 (Route 2--New London, Norwich).
- Follow Route 2 all the way through Norwich.
- Follow the signs for Route 2 East. Follow into Preston, North Stonington, and Pawcatuck.
- At the end of Route 2 (there will be a Mobil station on your right and the Pawcatuck Bridge in front of you), take a right onto Route 1.
- Follow Route 1 approximately 1.8 miles.
- Davis-Standard is on the left past the high school.
Black Clawson Converting Machinery
46 North First Street
Fulton, NY 13069
Tel +1 (315) 598-7121
From the Syracuse International Airport, the drive should take about 35 minutes.
- Take I-81 North as you exit airport.
- Drive 3 miles to exit 29N onto 481 North towards Oswego.
- Drive 20 miles to the Fulton city limits.
- At the 5th light, turn left onto Oneida Street.
- At first light, turn right onto North First Street.
- Black Clawson Converting Machinery is directly in front of you.
- Guest parking is in front of main entrance.
From Rochester International Airport, the drive should take 1 hour and 45 minutes.
- Take I-90 East to exit 39.
- Take 690 West.
- Drive 6 miles on 690 West and the divided highway ends. It becomes Country Route 48.
- Proceed straight and drive 10 miles to the Fulton city limits.
- At the second traffic light, turn right onto Oneida Street.
- Immediately after bridge at the 1st traffic light, turn left on North First Street.
- Black Clawson Converting Machinery is directly in front of you.
Local Hotels
- Riverside Inn: On left as you enter Fulton just after the divided part of Rt. 481 ends. (315) 593-2444
- Fairfield Inn: Take Rt. 31 exit off of 481 approximately 15 minutes before Fulton. (315) 622-2576
- Captain's Quarters: Take Rt. 481 past Fulton for 10 miles into Oswego on the left. (315) 342-4040
Egan
Film and Coating Systems & Blow Molding Systems
36 South Adamsville Road
Somerville, NJ 08876
Phone: (908) 722-6000
Fax: (908) 722-6444
From Newark Airport:
- Take the Airport Exit (left lane while passing Marriott)
- Take 1/9 North (To 78) (left lane on overpass) < 0.1 mile
- Follow directions for 78 West 2 miles
- Follow 78 West to exit 29, 287 South ~30 miles
- Get off at Exit 13 (28 West) ~8 miles
- Follow appropriate "To Davis-Standard" or "To Hilton Garden" below
From Connecticut via I-95:
- Take I-95 south to the George Washington Bridge to the turnpike
- Get off at Exit 10, follow signs to Rt. 287 north
- Get off at Exit 13B (28 West)
- Follow appropriate "To Davis-Standard" or "To Hilton Garden" below
From Connecticut via Rt 287 South:
- Take I-95 south to the Tapanzee Bridge
- Follow signs for 287 South (Port Chester, New York)
- Follow signs to New Jersey I-287
- Get off at Exit 13 (28 West)
- Follow appropriate "To Davis-Standard" or "To Hilton Garden" below
Davis-Standard
- Go down to the fourth light and turn left onto Finderne Ave for 1.5 miles.
- At the next light, turn right onto Main Street and procede for 0.4 miles.
- Go 6 blocks and turn left onto South Adamsville Rd (appox 0.4 miles).
- Make second right (just before fence) and follow around.
- You will pass over train tracks and continue all the way to main entrance < 0.1 mile.
Hilton Garden
500 Promenade Blvd.
Bridgewater, NJ 08807
Phone: (732) 271-9030
Fax: (732) 271-9031
- Coming off the exit, get into the left lane
- At second traffic light, turn left into shopping complex 0.1 miles
- Follow road around bend and Hotel in on the right
